• Details

• Product Name: Toyota Key Programmer
  Part No.: CK005
  Net Weight: 0.72KG
  
  Description:
  
  This adapter can be used to read the pin code of the transponder key automatically, and write the pin code into the computer transponder of the suited ECU. It can be used to match the vehicle without keys and needn t change any computer when matching.Be suitable for all the Toyota Series from 1997 to 2005.
  
  Be suitable for the wafer key s match of Toyota, such as LEXUS (LS400 ES300 GS300 IS2000 IS300) Camry 2.0 2.4 JEEP-2007 3400 4500 4700 AVALON PREVIA.
  
  Equip English using manual. Offer technology support.
  
  From the date of purchase we provide for a 18 month repair warranty with conditions.
  
  Use for the following cars:
  
  ES300(1997-2003)
  GS300(1997-2003)
  GS400(1997-2000)
  GX430(2001-2003)
  IS300-IS200(2001-2003)
  LS400(1997-2000)
  LX470(1998-2002)
  RX300(1999-2003)
  SC300(1998-2001)
  SC400(1998-2001)
  4Runner(1999-2003)
  Avalon(1998-2003)
  Cammry-4cly(1998-2005)
  HighLander(2001-2003)
  Lander Cruiser(1998-2003)
  MR2(2000-2003)
  RAV4(2000-2003)
  Sequoia(2000-2003)
  Sienna(1998-2003)
  Solara(1999-2003)
  Previa(1999-2003)
  
  Operations of key programmer:
  
  Dismantle the engine ECU from the vehicle (or IMMO) and take down the IC chip identified as 93C56 (fixed to the computer in the vehicle engine; for the Camry being IC601, and Lexus being IC900. Identification number for a chip fixed to IMMO is 93LC66). Clean up every pin of IC to make sure of a sound connection.
  
  Install 93C56 on the device through programmer; make sure that the connection is good.
  
  Supply electricity to the programmer, the screen will show can work normal with a beep sound indicating that the machine is working well.
  
  Press R-key, and the red light LED will be lit; programmer is thus ready for programming.
  
  Put the key on the key logo of the programmer.
  
  Press R-key again to hear the beep sound beep 4 times, and the red light also goes off, these means that the key has been successfully programming to the programmer. If the beep sound is not made 4 times, then repeat the operation until you hear the exact 4 beep sound.
  
  By the stated operations you can programming 3 keys to the programmer altogether.
  
  Now you can verify whether the 3 keys have been actually programmed: press R key, put a key near the key logo, if a 4 beep sound is made, that means the programming is effective. Every key must be verified so that they can be program to 93LC56 and 93LC66.
  
  

• Related Leads
• auto diagnostic tool professional car key progammer chip tuning bianchi 883 for 4c 4 car key programmer auto diagnostic too car tool motorolla mcu progra auto programmer bmw inpa new package diagnos x 431 top professional diagnos lexia 3 citroen peug vag xobd tool bmw ops vag pin read vag prog vip version odometer correction s600 with data strea code scanner canscan d900 volvo serial diagnos vag diagnostic tool tms 374 programmer star auto scanner x431 toyota programmer x 431 star scanner renault can clip interface mb 2007 v checker obdii