Xuanhua Construction Machinery Co., Ltd
Home  |
Products  |
Selling Leads  |
Buying Leads  |
Chating  |
Contacts
  • Buy Leads T165-2 bulldozer
       
  Post Time： 2007-08-28  
  Expiry Date： 2008-08-22  
  Category： > Construction & Real Estate > Earthwork Products  
  Keywords： bulldozer  construction  machienry  tractor  
  • Details
  • It has characteristic of semi-rigid suspension, mechanical drive. The main clutch is hydraulic boosted. The articulated point of the implement cylinder is at both sides of the guard. With hydraulic pilot controlled, electric monitoring, good appearance.

    Main Specifications:
    Overall dimensions (L*W*H): 5416*3297*3160 mm (straight)
    5566*3726*3160 mm (angle)
    Operation weight: 17.8t(straight); 18.2t(angle) Flywheel power: 121kW
    Max. Drawbar pull: 139.6 kN(straight); 142.7kN(angle)
    (The efficient force depends on weight and ground surface adherence)
    Ground pressure (at operating weight): 69KPa
    Min. Ground radium: 3.9 m Min. Ground clearance: 352.5 mm

    Diesel Engine
    Manufactured factory: Weifang Diesel Engine Co., Ltd
    Model: WD615T1-3B
    Type: Straight line, water-cooled, with four stroke, pressure boost and direct injection
    Cylinders Number-bore diameter*travel distance: 6-126*130mm
    Displacement: 9.726 L Rated RPM: 1800 r/min
    Rated power: 130 kW Max. Torque: 870 N. M/1200-1300 rpm
    Fuel consumption (at rated working condition): 225 g/kW. H
    Oil consumption: 1.8 g/kW. H Admissible altitude: <=4000m
    Cooling method: Closed circulation water cooled
    Starting method: Electrically starting at 24V pressure

    Manufactured factory: Shanghai Diesel Engine Co., Ltd
    Model: G128ZG8 Type: Straight line, water-cooled, with four stroke,
    Cylinders Number-bore diameter*travel distance: 6-135x150mm
    Displacement: 12.88 L Rated RPM: 1800 r/min
    Rated power: 130 kW Max. Torque: 838 N. M/1260 rpm
    Fuel consumption (rated working condition): 224 g/kW. H
    Oil consumption: 0.7 g/kW. H Admissible altitude: <=4000m
    Cooling method: Closed circulation water cooled
    Starting method: Electrically starting at 24V pressure

    Main Clutch And Transmission: The flywheel clutch is constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting, . The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds REVERSE.

    Steering And Braking: The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs. The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.

    Final Drive: The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.

    Undercarriage System: Inner and outer beam of track roller frame are rectangular section. Track roller, carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.

    Track Roller (each side):
    Singe flange: 4 Double flange: 2 Carrier roller(each side): 2
    Idler (each side): 1 Type of track: Single grouser combined
    Tension mode of track: Hydraulic Pitch: 203mm
    Number of shoes(each side): 38 pieces Width of shoe: 500mm
    Length of track on ground: 2570mm
    Sealed and lubricated track: The pitch, numbers and width of track shoes are the same with the general track.

    Implement Hydraulic System: It consists of two group gear pump, pilot valve, main valve, cylinders, oil filter and lines.
    Pump type: Two group gear oil pump
    Front pump: 190L/min Pilot pump: 19L/min System pressure: 12MPa

    Service Refill
    Radiator and diesel engine water: 60
    Lubricating system of diesel engine oil: 25(G128), 20(WD615)
    Flywheel house, main clutch oil: 35 Transmission, bevel gear case Oil: 95
    Final drive(each side) Oil: 24 Implement hydraulic system Oil: 80
    Fuel tank Oil: 285
    Idle track roller, carrier roller, front idler(each) Oil: 0.35
  • Trade Lead Image
           
  • Contact Details
Company Name︰ Xuanhua Construction Machinery Co., Ltd  
Company Address︰ 20Dongsheng Road,Xuanhua Area,Zhangjiakou City,P.R.China  
Tel︰ 86-0313-8833076  
Fax︰ 86-0313-3186027  
Contact︰ Song Liqin ( Project Manager )  
Mobile︰  
websie︰  
         
  • Copmany Name: Xuanhua Construction Machinery Co., Ltd   Contact: Song Liqin
  • Address: 20Dongsheng Road,Xuanhua Area,Zhangjiakou City,P.R.China
  • TeL: 86-0313-8833076   Fax: 86-0313-3186027
  • Powered by Madeinchina factory   Chinese Site   manufacturers   Importers