smoke fire detector(ABS-21)
Description:
Widely used for room, hall, kitchen, party, no smoking place,
Hotel, Factory Alarm mode: while smoke density reach the limited, it gives off alarm warning as
well as sending wireless signal to alarm panel, High
sensitivity, interconnect up to alarm. Unique “battery missing” lockout.
Customized.
Specification:
1.Battery operated: DC 9V.
2. Rechargeable lion battery 10 year 9 DC battery.
3. Photoelectric sensor.
4.Red LED indicate alarm. Green LED mains indicator light to confirm battery power supply
5.Test button, Low battery alarm
6.Relay contacts-volt free with Normally open and Normally closed options
and rated to 24 volts/1 amp resistive.
7.Alarm supplied with “ connector plug” for easy of installation ,built in
sounder to give a minimum sound output of 85 dB at 3 m senses smoke
using the light scatter principle-quick response to visible smouldering smoke,test button simulates smoke- use to check performance at least monthly,
option current <10uA, alarm current<30 UA.
gas detectors(ABS-22)
1)Alarm mode: Give an alarm warning while Alarm density reaches: Coal gas: 1000~5000ppm, LGP: 1000~5000ppm, natural gas: 1000ppm~5000ppm
2)Working mode: Independence & Network optional:
work solely at party,room etc.
work with our burglar alarm panel, so the alarm panel automatically dial up the alarm phone.
3)siren:>90db 4) strict method with good quality
4) Auto reset after alarm
Specification:
1. Operating Voltage:AC220V, or AC110V; DC12~20V
2. Working temperature: -10degree~50 degree
3. Alarm density: Coal gas: 2000ppm+/- 30%, natural gas: 2000ppm+/-30%,
Liquid petroleum gas: 5000ppm+/-30%,
5. Operating Frequency: 433 MHZ/315MHZ (optional)
4. Responding time: less than 2 seconds
6. Net Weight: 0.2kg
7.Size: 115mm(L)×71mm(W)×43mm(H)
Product Image
Contact Information of this Company
Company Name︰
Anboshi Electronic Technology Co., Ltd
Company Address︰
the 3rd Floor, Xinwucun Building Longzhu Road, Nanshan District, Shenzhen, China