• Details

• The programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.
  Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.
  The operating step as follows: ( read the using step and the importance notice carefully)
  1. Turn the ignition on with the right 4D chip key.
  2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the “LED” is on, as well as the anti-light “SEC”, which means the car is in the “key programming state”.
  3. Take away the programmer from OBD.
  4 Matches 2 pcs main key and 1 pc vice-key to the IMMO computer （ Notice: 2 new main key and 1 vice-key are needed to close the programming procedure）
  a) Close all the car door.
  b) Insert the first new main key to the ignition for 5 seconds.
  c) Insert the other main key to the ignition for 5 seconds.
  d) Insert the vice-key to the ignition for 5 seconds.
  e) The new ignition key will be confirmed by the new IMMO.
  

• Related Leads
• auto accessories parts maintenances vw can key program t prog plus toyota obd 32mb card new super vag k+can mvp key programm mb key programmer gm tech2 ecu reader e car cable candi interface gm summ bmw bmw cas3 programmer key programer launch x431 bmw carsoft