AUTOSVS TECHNOLOGY CO.,LTD
Home  |
Products  |
Selling Leads  |
Buying Leads  |
Chating  |
Contacts
  • BDM100
       
  Post Time: 2008-04-25  
  Expiry Date: 2008-04-25  
  Category: > Automobile > Auto Maintenance  
  Keywords: BDM100 1242  BDM100  ECU Chip Tuning  BDM V1242  auto diagnostic tool  auto maintenance  
  • Details
  • The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100

    Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car. Generally we use the “easiest” way of programming. So if a car can be programmed by the OBD port, we will do it this way.

    After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chiptuning of ECUs with Motorola MPC555 - 565.

    This generation of Motorola processors contain 448KB - 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. Therfore it is possible over the so called BDM interface, which must be implemented on every ECU board. For that purpose there are mostly 10 solder pads on the PCB.

    Alternative there are ECUs with 12 or 14 solder pads, which can be supplied with operating voltage over these pads.

    The BDM100 connects these solder pads of the BDM port with the WinOLS PC over the USB bus. The BDM100 gets its operating voltage from the USB bus. The ECU needs its own supply voltage of +12 volts.

    The BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).

    The BDM100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).

  • Trade Lead Image
           
  • Contact Details
Company Name︰ AUTOSVS TECHNOLOGY CO.,LTD  
Company Address︰ FLAT 7G CHANGJINGGE YECHENG BUILDING, XINZHOU NORTH RD, FUTIAN DISTRICT, SHENZHEN CITY 518034 P.R. CHINA  
Tel︰ 86-0755-89952995  
Fax︰ 86-0755-83529585  
Contact︰ selina ( sales )  
Mobile︰ 86-13410649501  
websie︰ http://www.store.autosvs.com  
         
  • Copmany Name: AUTOSVS TECHNOLOGY CO.,LTD   Contact: selina
  • Address: FLAT 7G CHANGJINGGE YECHENG BUILDING, XINZHOU NORTH RD, FUTIAN DISTRICT, SHENZHEN CITY 518034 P.R. CHINA
  • TeL: 86-0755-89952995   Fax: 86-0755-83529585
  • Powered by Madeinchina factory   Chinese Site   manufacturers   Importers