• Details

• Splendor Metal Bond is a 2 component epoxy adhesive. Component A is a slightly yellowish flowable paste. Component B is a flowable paste. The adhesive will start reacting after mixing by thickening and eventually will become a tough product with outstanding adhesive properties.
  TYPICAL USE
  It is specifically formulated to bond:
  Rubber floor covering to smooth surfaces (Concrete, metal, cement screed).
  Tufted carpets backed with latex foam to smooth surfaces indoor or outdoors.
  Wood block flooring on damp surfaces.
  Rubber or synthetic sport flooring for indoor and outdoor applications over concrete.
  PRODUCT CHARACTERISTICS
  Physical properties of parts A & B mixed.
  Specific gravity (ASTM 1475): 1.70
  Tensile (ASTM 2370): 2,400 psi/mil
  Elongation (ASTM 2370): 20%
  Shore Hardness (ASTM 2240): 80
  Coverage: 160 to 240 sq.ft./2 US gallons or 2-3 sq.m/litre depending on the surface conditions and the trowel.
  DRYING TIME
  Setting time: The setting time is strongly influenced by the temperature as indicated below:
  Temperature (C) 30 25 20 15 10 5
  Temperature (F) 90 80 70 60 50 40
  Hrs. Setting time 3.5 5.5 7.5 12 24 36
  Tough dry: Very light traffic for 24-48 hours.
  Dry hard: Regular traffic 72-96 hours
  Full cure: 7-10 days.
  PACKING AND STORAGE
  52grams per blister card ( 1OZ x 2 tubes each set), 12 blister card per inner box, 12 inner boxes per outside carton.
  

• Related Leads
• silicone gasket maker cleaner carburetor and choke spray paint sealant leather cleaner leather pu foam polyurethane foam cleaner cockpit shine chrome aluminum metal bond fluid silicone sealant spray paint car care products silicone sausage